High Head/Flow Effluent pumps & Software
Ideal for high or low head pumping. The high head effluent pumps have a long life cycle and are built for heavy use. Their design allows for high heads and pressure with a low operating cost. Available in a variety of gallons per minute, voltages and models.
Orenco Pump Select
Pump selection is made easy with Orencos pump select software, pump select is a fast effect selection program that completed the various flow calculations required when constructing pump to gravity , pressure and shallow buried trench beds. It will outline where changes are required in the design and recommend solutions as well as provide a system curve and recommended pump curve overlay to make pump selection quick and painless.
Download Pump Select
PF Series High Head Effluent Pumps
- Lightweight
- Constructed of corrosion-resistant stainless steel and engineered plastic
- For use with a Biotube® Pump Vault or after secondary wastewater treatment
- 60-Hz and 50-Hz models available
- Minimum 24-hour run-dry capability with no deterioration in pump life or performance [excludes 5-hp (3.73 kW) models]
- 1⁄8-inch (3-mm) bypass orifice (patent pending) to ensure flow recirculation for motor cooling and to prevent air bind
- Super Stainless motor by Franklin Electric; rated for continuous use
- Rated for frequent cycling
- Type SOOW 600-V motor cable; suitable for Class I, Division 1 and Division 2 applications
- Repairable liquid end (repair kits available)
- TRI-SEAL™ floating impeller design on 10, 15, 20, and 30 gpm (0.6, 1.3, and 1.9 L/sec) models; floating stack design on 50 and 75 gpm (3.2 and 4.7 L/sec) models
- CSA certified to US and Canadian safety standards
- 5-year warranty on pump or retrofit liquid end from date of manufacture against defects in materials or workmanship
- Manufactured exclusively for Orenco
High Flow Effluent Pumps
PF Series High-Flow Submersible Effluent Pumps are designed to transport screened effluent with low counts of Total Suspended Solids (TSS) in high-flow AdvanTex AX-Max and AX-Mobile Treatment Systems. They are also used in pump applications that require both high head and high flows. To provide high head and high flow, PF Series high-flow pumps combine a 6-inch (150-mm) liquid end and a 4-inch (100-mm) pump motor. PF high-flow pumps are lightweight and made of corrosion-resistant stainless steel and engineered plastics. They are field-serviceable with common tools. PF high-flow pumps are not rated for run-dry capability.
- Lightweight
- Constructed of corrosion-resistant stainless steel and engineered plastic
- Requires 8-inch (200-mm) flow inducer
- 60-Hz and 50-Hz models available
- Super Stainless motor by Franklin Electric; rated for continuous use
- Motor rated for frequent cycling
- Type 14/4 SOOW 600-V motor cable for 145-gpm (9.2 L/sec) pumps and 3-phase 120-gpm (7.6 L/sec) pumps; suitable for Class I, Division 1 and Division 2 applications (145-gpm pumps)
- Type 16/3 SOOW 600-V motor cable for single-phase 120-gpm (7.2 L/sec) pumps; suitable for Class I, Division 1 and Division 2 applications
- 5-year warranty on pump or liquid end from date of manufacture against defects in materials or workmanship
- CSA certified to US and Canadian safety standards
- Manufactured exclusively for Orenco